Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 126
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
CLI NAVIGATION COMMANDS
SHOW
HISTORY
show history
Overview This command lists the commands entered in the current session. The history
buffer is cleared automatically upon reboot.
The output lists all command line entries, including commands that returned an
error.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show history
Mode User Exec and Privileged Exec
Example To display the commands entered during the current session, use the command:
awplus# show history
Output Figure 1-2: Example output from the show history command
1 en
2 show ru
3 conf t
4 route-map er deny 3
5 exit
6 ex
7 di

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English