C613-50631-01 Rev A Command Reference for IE340 Series 2613
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OPENFLOW COMMANDS
OPENFLOW
SSL TRUSTPOINT
openflow ssl trustpoint
Overview Use this command to configure the local trustpoint to be used for authentication.
Use the no variant of this command to disable the local trustpoint.
Syntax
openflow ssl trustpoint local
no openflow ssl trustpoint local
Default There is no trustpoint configured by default.
Mode Global Configuration mode.
Usage notes Use this command to specify a local self-signed certificate authority trustpoint for
authentication. You must first create the trustpoint using the crypto pki
trustpoint command.
Example To configure a local trustpoint, use the commands:
awplus# configure terminal
awplus(config)# openflow ssl trustpoint local
To delete the local trustpoint, use the command:
awplus(config)# no openflow ssl trustpoint
Related
commands
openflow controller
openflow ssl trustpoint
Command
changes
Version 5.4.7-1.1: command added
Version 5.4.7-2.1: command added to IE300, IE500 series products
Version 5.4.8-0.2: added to SBx908 GEN2
Version 5.4.8-1.1: added to IE210L series products
To Next Page
Loading...
Need help?
General
