Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2583
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
SHOW
ARP SECURITY INTERFACE
show arp security interface
Overview Use this command to display ARP security configuration for the specified ports or
all ports.
Syntax
show arp security interface [<port-list>]
Mode User Exec and Privileged Exec
Example To display ARP security configuration for ports, use the command:
awplus# show arp security interface
Parameter Description
<port-list> The ports to display ARP security information about. The port list can
include switch ports, and static or dynamic aggregated links.
Table 3: Example output from the show arp security interface command
awplus#show arp security interface 

Arp Security Port Status and Configuration:

Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
KEY: LG = Log
TR = Trap
LD = Link down

Port Action
-------------------------------
port1.0.1 -- -- --
port1.0.2 -- -- --
port1.0.3 LG TR LD
port1.0.4 LG -- --
port1.0.5 LG -- --
port1.0.6 LG TR --
port1.0.7 LG -- LD
...

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English