C613-50631-01 Rev A Command Reference for IE340 Series 169
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
ERASE
STARTUP-CONFIG
erase startup-config
Overview This command deletes the file that is set as the startup-config file, which is the
configuration file that the system runs when it boots up.
At the next restart, the device loads the default configuration file, default.cfg. If
default.cfg no longer exists, then the device loads with the factory default
configuration. This provides a mechanism for you to return the device to the
factory default settings.
Syntax
erase startup-config
Mode Privileged Exec
Example To delete the file currently set as the startup-config, use the command:
awplus# erase startup-config
Related
commands
boot config-file backup
copy running-config
copy startup-config
show boot
To Next Page
Loading...
Need help?
General
