Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2351
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AAA COMMANDS
AAA
ACCOUNTING LOGIN
aaa accounting login
Overview This command configures RADIUS and TACACS+ accounting for login shell
sessions. The specified method list name can be used by the accounting login
command in the Line Configuration mode. If the default parameter is specified,
then this creates a default method list that is applied to every console and VTY line,
unless another accounting method list is applied on that line.
Note that unlimited RADIUS servers and up to four TACACS+ servers can be
configured and consulted for accounting. The first server configured is regarded as
the primary server and if the primary server fails then the backup servers are
consulted in turn. A backup server is consulted if the primary server fails, i.e. is
unreachable.
TACACS+ is not available in Secure Mode (see the crypto secure-mode command).
Use the no variant of this command to remove an accounting method list for login
shell sessions configured by an aaa accounting login command. If the method list
being deleted is already applied to a console or VTY line, accounting on that line
will be disabled. If the default method list name is removed by this command, it will
disable accounting on every line that has the default accounting configuration.
Syntax
aaa accounting login
{default|<list-name>}{start-stop|stop-only|none} {group
{radius|tacacs+|<group-name>}}
no aaa accounting login {default|<list-name>}
Default Accounting for login shell sessions is disabled by default.
Mode Global Configuration
Parameter Description
default Default accounting method list.
<list-name> Named accounting method list.
start-stop Start and stop records to be sent.
stop-only Stop records to be sent.
none No accounting record to be sent.
group Specify the servers or server group where accounting packets are
sent.
radius Use all RADIUS servers configured by the radius-server host
command.
tacacs+ Use all TACACS+ servers configured by the tacacs-server host
command.
<group-name> Use the specified RADIUS server group, as configured by the aaa
group server command.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English