Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2352
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AAA COMMANDS
AAA
ACCOUNTING LOGIN
Usage notes This command enables you to define a named accounting method list. The items
that you define in the accounting options are:
• the types of accounting packets that will be sent
• the set of servers to which the accounting packets will be sent
You can define a default method list with the name default and any number of
other named method lists. The name of any method list that you define can then
be used as the <list-name> parameter in the accounting login command.
If the method list name already exists, the command will replace the existing
configuration with the new one.
There are two ways to define servers where RADIUS accounting messages are sent:
• group radius : use all RADIUS servers configured by radius-server host
command
• group <group-name> : use the specified RADIUS server group configured
with the aaa group server command
There is one way to define servers where TACACS+ accounting messages are sent:
• group tacacs+ : use all TACACS+ servers configured by tacacs-server host
command
The accounting event to send to the RADIUS or TACACS+ server is configured with
the following options:
• start-stop : sends a start accounting message at the beginning of a session
and a stop accounting message at the end of the session.
• stop-only : sends a stop accounting message at the end of a session.
• none : disables accounting.
Examples To configure RADIUS accounting for login shell sessions, use the following
commands:
awplus# configure terminal
awplus(config)# aaa accounting login default start-stop group
radius
To configure TACACS+ accounting for login shell sessions, use the following
commands:
awplus# configure terminal
awplus(config)# aaa accounting login default start-stop group
tacacs+
To reset the configuration of the default accounting list, use the following
commands:
awplus# configure terminal
awplus(config)# no aaa accounting login default

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English