Allied Telesis IE340 Series - Precision Time Protocol (PTP) and Transparent Clock Commands; Introduction

61
C613-50631-01 Rev A Command Reference for IE340 Series 3155
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Precision Time
Protocol (PTP) and
Transparent Clock
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
Precision Time Protocol (PTP) and Transparent Clock.
For more information, see the Precision Time Protocol (PTP) and Transparent Clock
Feature Overview and Configuration Guide.
Command List •“clock-port” on page 3156
•“ptp-clk” on page 3157
•“ptp global” on page 3159
•“show ptp data transparent” on page 3160
•“show ptp port” on page 3161