Allied Telesis IE340 Series - show debugging private-vlan

C613-50631-01 Rev A Command Reference for IE340 Series 646
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
SHOW
DEBUGGING PRIVATE-VLAN
show debugging private-vlan
Overview Use this command to show whether debugging for a private-vlan, namely UFO, is
enabled.
Syntax
show debugging private-vlan
Mode Privileged Exec
Example To show if debugging is enabled for private-vlan UFO, use the command:
awplus# show debugging private-vlan
Output Figure 16-1: Example output from show debugging private-vlan
Related
commands
debug private-vlan ufo
Command
changes
Version 5.4.7-2.1: command added.
Version 5.4.8-2.1: added to SBx8100 Series products
Version 5.4.9-0.1: added to x530 Series products
awplus#show debugging private-vlan

Private-VLAN debugging status:
UFO debugging is off