Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3152
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
NTP COMMANDS
SHOW
NTP COUNTERS
show ntp counters
Overview This command displays packet counters for NTP.
Syntax
show ntp counters
Mode Privileged Exec
Example To display counters for NTP use the command:
awplus# show ntp counters
Figure 60-1: Example output from show ntp counters
awplus#show ntp counters
Server Received 4
Server Dropped 0
Client Sent 90
Client Received 76
Client Valid Received 76
Table 60-3: Parameters in the output from show ntp counters
Parameter Description
Server
Received
Number of NTP packets received from NTP clients.
Server Dropped Number of NTP packets received from NTP clients but dropped.
Client Sent Number of NTP packets sent to servers.
Client
Received
Number of NTP packets received from servers
Client Valid
Received
Number of valid NTP packets received from servers.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English