Allied Telesis IE340 Series - clear application-proxy threat-protection

C613-50631-01 Rev A Command Reference for IE340 Series 2884
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
CLEAR
APPLICATION-PROXY THREAT-PROTECTION
clear application-proxy threat-protection
Overview Use this command to clear the threat protection for a specified address.
Syntax
clear application-proxy threat-protection {<ip-address>|
<mac-address>|all}
Mode Privileged Exec
Example To clear the threat for 10.34.199.117, use the command:
awplus# clear application-proxy threat-protection 10.34.199.117
Related
commands
application-proxy quarantine-vlan
application-proxy threat-protection
application-proxy threat-protection send-summary
service atmf-application-proxy
show application-proxy threat-protection
Command
changes
Version 5.4.7-2.2: command added
Parameter Description
<ip-address> The IPv4 address you wish to clear the threat for, in A.B.C.D format.
<mac-address> The MAC address you wish to clear the threat for, in
HHHH.HHHH.HHHH format.
all Clear the threat for all IPv4 and MAC addresses.