C613-50631-01 Rev A Command Reference for IE340 Series 1847
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-SMV6 COMMANDS
CLEAR
IPV6 MROUTE PIM
clear ipv6 mroute pim
Overview Use this command to clear all Multicast Forwarding Cache (MFC) entries in
PIM-SMv6.
NOTE: Static IPv6 multicast routes take priority over dynamic IPv6 multicast routes. Use
the clear ipv6 mroute command to clear static IPv6 multicast routes and ensure
dynamic IPv6 multicast routes can take over from previous static IPv6 multicast routes.
Syntax
clear ipv6 mroute [*] pim sparse-mode
Mode Privileged Exec
Example
awplus# clear ipv6 mroute pim sparse-mode
awplus# clear ipv6 mroute * pim sparse-mode
Parameter Description
* Clears all PIM-SMv6 multicast routes. Using this command without
this optional operator only deletes the multicast router table entries.
To Next Page
Loading...
Need help?
General
