51
C613-50631-01 Rev A Command Reference for IE340 Series 2550
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP Snooping
Commands
Introduction
Overview This chapter gives detailed information about the commands used to configure
DHCP snooping. For detailed descriptions of related ACL commands, see IPv4
Hardware Access Control List (ACL) Commands. For more information about DHCP
snooping, see the DHCP Snooping Feature Overview and Configuration Guide.
DHCP snooping can operate on static link aggregators (e.g. sa2) and dynamic link
aggregators (e.g. po2), as well as on switch ports (e.g. port1.0.2).
Command List •“arp security” on page 2552
•“arp security drop link-local-arps” on page 2553
•“arp security violation” on page 2554
•“clear arp security statistics” on page 2556
•“clear ip dhcp snooping binding” on page 2557
•“clear ip dhcp snooping statistics” on page 2558
•“debug arp security” on page 2559
•“debug ip dhcp snooping” on page 2560
•“ip dhcp snooping” on page 2561
•“ip dhcp snooping agent-option” on page 2563
•“ip dhcp snooping agent-option allow-untrusted” on page 2564
•“ip dhcp snooping agent-option circuit-id vlantriplet” on page 2565
•“ip dhcp snooping agent-option remote-id” on page 2566
•“ip dhcp snooping binding” on page 2567
•“ip dhcp snooping database” on page 2568
•“ip dhcp snooping delete-by-client” on page 2569
•“ip dhcp snooping delete-by-linkdown” on page 2570
To Next Page
Loading...
Need help?
General
