Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1783
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
MULTICAST COMMANDS
SHOW
IPV6 MROUTE
show ipv6 mroute
Overview Use this command to display the contents of the IPv6 multicast routing (mroute)
table.
Syntax
show ipv6 mroute [<ipv6-group-addr>] [<ipv6-source-addr>]
[{count|summary}]
Mode User Exec and Privileged Exec
Examples
awplus# show ipv6 mroute
awplus# show ipv6 mroute count
awplus# show ipv6 mroute summary
awplus# show ipv6 mroute 2001::2 ff08::1 count
awplus# show ipv6 mroute 2001::2 ff08::1
awplus# show ipv6 mroute 2001::2 summary
Output The following is a sample output of this command displaying the IPv6 multicast
routing table for a single static IPv6 Multicast route:
Figure 34-10: Example output from the show ipv6 mroute command
Parameter Description
<ipv6-group-addr> Group IPv6 address, in hexadecimal notation in the format
X.X::X.X.
<ipv6-source-addr> Source IPv6 address, in hexadecimal notation in the format
X.X::X.X.
count Display the route and packet count from the IPv6 multicast
routing (mroute) table.
summary Display the contents of the IPv6 multicast routing (mroute)
table in an abbreviated form.
awplus#show ipv6 mroute 
IPv6 Multicast Routing Table 
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder 
installed 
Timers: Uptime/Stat Expiry 
Interface State: Interface 
(2001::2, ff08::1), uptime 03:18:38 
Owner IMI, Flags: F 
Incoming interface: vlan2 
Outgoing interface list: 
vlan3

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English