Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 182
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
FILE SYSTEMS
show file systems
Overview This command lists the file systems and their utilization information where
appropriate.
Syntax
show file systems
Mode Privileged Exec
Examples To display the file systems, use the command:
awplus# show file systems
Output Figure 3-10: Example output from the show file systems command
awplus#show file systems

Size(b) Free(b) Type Flags Prefixes S/D/V Lcl/Ntwk Avail
-------------------------------------------------------------------
125.9M 111.8M flash rw flash: static local Y
- - system rw system: virtual local -
10.0M 9.8M debug rw debug: static local Y
7.0G 4.6G usbstick rw usb: dynamic local Y
- - fserver rw fserver: dynamic network N
- - tftp rw tftp: - network -
- - scp rw scp: - network -
- - sftp ro sftp: - network -
- - http ro http: - network -
- - rsync rw rsync: - network -
Table 4: Parameters in the output of the show file systems command
Parameter Description
Size (b) The total memory available to this file system. The units are given
after the value and are M for Megabytes or k for kilobytes.
Free (b) The total memory free within this file system. The units are given
after the value and are M for Megabytes or K for kilobytes.
Type The memory type used for this file system, such as:
flash
system
nvs
usbstick
tftp
scp
sftp
http.
Flags The file setting options: rw (read write), ro (read only).

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English