C613-50631-01 Rev A Command Reference for IE340 Series 183
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
FILE SYSTEMS
Related
commands
edit
show file
Prefixes The prefixes used when entering commands to access the file
systems, such as:
flash
system
nvs
usb
tftp
scp
sftp
http.
S/D/V The memory type: Static, Dynamic, Virtual.
Lcl / Ntwk Whether the memory is located locally or via a network
connection.
Avail Whether the memory is accessible: Y (yes), N (no), - (not applicable)
Table 4: Parameters in the output of the show file systems command (cont.)
Parameter Description
To Next Page
Loading...
