C613-50631-01 Rev A Command Reference for IE340 Series 1235
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPFV3 FOR IPV6 COMMANDS
DEBUG
IPV6 OSPF IFSM
debug ipv6 ospf ifsm
Overview This command specifies debugging options for IPv6 OSPF Interface Finite State
Machine (IFSM) troubleshooting.
To enable all debugging options, specify debug ipv6 ospf ifsm with no additional
parameters.
The no and undebug variants of this command disable IPv6 OSPF IFSM
debugging. Use these commands without parameters to disable all the options.
Syntax
debug ipv6 ospf ifsm [events] [status] [timers]
no debug ipv6 ospf ifsm [events] [status] [timers]
Mode Privileged Exec and Global Configuration
Example To specify IPv6 OSPF debugging options to display IPv6 OSPF IFSM events
information, use the following commands:
awplus# debug ipv6 ospf ifsm events
Related
commands
terminal monitor
undebug ipv6 ospf ifsm
Parameter Description
events Displays IFSM event information.
status Displays IFSM status information.
timers Displays IFSM timer information.
To Next Page
Loading...
Need help?
General
