Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 607
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
SHOW
PLATFORM
show platform
Overview This command displays the settings configured by using the platform commands.
Syntax
show platform
Mode Privileged Exec
Usage notes This command displays the settings in the running config. For changes in some of
these settings to take effect, the device must be rebooted with the new settings in
the startup config.
Example To check the settings configured with platform commands on the device, use the
following command:
awplus# show platform
Output Figure 15-7: Example output from the show platform command:
awplus#show platform
MAC vlan hashing algorithm crc32l
L3 hashing algorithm crc32l
Load Balancing src-dst-ip
stop-unreg-mc-flooding off
Vlan-stacking TPID 0x8100
Hardware Filter Size ipv4-limited-ipv6
Table 16: Parameters in the output of the show platform command. Note that the parameters
displayed depend on your device, and that not all displayed parameters can be modified on
all devices.
Parameter Description
Routing Ratio Whether all memory is allocated to IPv4 address table entries only, or whether it is
allocated evenly to both IPv4 and IPv6 addresses (set with the platform
routingratio command).
Route Weighting The split between multicast and unicast route entries (set with the platform
routingratio command).
MAC vlan hashing
algorithm
The MAC VLAN hash-key-generating algorithm (set with the platform
mac-vlan-hashing-algorithm command). The default algorithm is crc32l. The
algorithm may need to be changed in rare circumstances in which hash collisions
occur.
L3 hashing algorithm The L3 VLAN hash-key-generating algorithm (set with the platform
l3-vlan-hashing-algorithm command). The default algorithm is crc32l. The
algorithm may need to be changed in rare circumstances in which hash collisions
occur.
Load Balancing Which packet fields are used in the channel load balancing algorithm (set with the
platform load-balancing command).

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English