C613-50631-01 Rev A Command Reference for IE340 Series 1594
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IPV6 PREFIX-LIST
show ipv6 prefix-list
Overview Use this command to display the prefix-list entries.
Note that this command is valid for RIPng and BGP4+ routing protocols only.
Syntax
show ipv6 prefix-list [<name>|detail|summary]
Mode User Exec and Privileged Exec
Example
awplus# show ipv6 prefix-list
awplus# show ipv6 prefix-list 10.10.0.98/8
awplus# show ipv6 prefix-list detail
Related
commands
ipv6 prefix-list
Parameter Description
<name> Specify the name of an individual IPv6 prefix list.
detail Specify this parameter to show detailed output for all IPv6 prefix lists.
summary Specify this parameter to show summary output for all IPv6 prefix lists.
To Next Page
Loading...
Need help?
General
