C613-50631-01 Rev A Command Reference for IE340 Series 1559
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
IP BGP ATTRIBUTE-INFO (BGP ONLY)
show ip bgp attribute-info (BGP only)
Overview Use this command to show internal attribute hash information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip bgp attribute-info
Mode User Exec and Privileged Exec
Example
awplus# show ip bgp attribute-info
Output Figure 30-9: Example output from the show ip bgp attribute-info command
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
attr[1] nexthop 0.0.0.0ď€
attr[1] nexthop 10.10.10.10ď€
attr[1] nexthop 10.10.10.50
To Next Page
Loading...
Need help?
General
