Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 163
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
DELETE
DEBUG
delete debug
Overview Use this command to delete a specified debug output file.
Syntax
delete debug <source-name>
Mode Privileged Exec
Example To delete debug output, use the following command:
awplus# delete debug
Output Figure 3-3: CLI prompt after entering the delete debug command
Related
commands
copy debug
move debug
Parameter Description
<source-name> The filename and path where the debug output originates.
See Introduction on page 137 for valid URL syntax.
Enter source file name []:

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English