C613-50631-01 Rev A Command Reference for IE340 Series 637
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
DEBUG
PRIVATE-VLAN UFO
debug private-vlan ufo
Overview Use this command to enable private-vlan Upward Forwarding Only (UFO)
debugging.
Use the no variant of this command to disable private-vlan UFO debugging.
Syntax
debug private-vlan ufo
no debug private-vlan ufo
Mode Privileged Exec
Usage notes Use this command to enable or disable private-vlan ufo debugging.
Example To enable private-vlan UFO debugging, use the commands:
awplus# configure terminal
awplus(config)# debug private-vlan ufo
Related
commands
show debugging private-vlan
private-vlan ufo trap
switchport mode private-vlan ufo
Command
changes
Version 5.4.7-2.1: command added
Version 5.4.8-2.1: added to SBx8100 Series products
Version 5.4.9-0.1: added to x530 Series products
To Next Page
Loading...
Need help?
General
