Allied Telesis IE340 Series - undebug all pim dense-mode

C613-50631-01 Rev A Command Reference for IE340 Series 1937
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
UNDEBUG
ALL PIM DENSE-MODE
undebug all pim dense-mode
Overview Use this command from the Global Configuration mode to disable all PIM-DM
debugging.
Syntax
undebug all pim dense-mode
Mode Global Configuration
Example
awplus# configure terminal
awplus(config)# undebug all pim dense-mode
Related
commands
debug pim dense-mode all
debug pim dense-mode context
debug pim dense-mode decode
debug pim dense-mode encode
debug pim dense-mode fsm
debug pim dense-mode mrt
debug pim dense-mode nexthop
debug pim dense-mode nsm
debug pim dense-mode vif