Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 345
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PLUGGABLES AND CABLING COMMANDS
SHOW
SYSTEM PLUGGABLE
show system pluggable
Overview This command displays brief pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
Syntax
show system pluggable [<port-list>]
Mode User Exec and Privileged Exec
Example To display brief information about all installed pluggable transceivers, use the
command:
awplus# show system pluggable
Output Figure 8-3: Example output from show system pluggable
Parameter Description
<port-list> The ports to display information about. The port list can be:
• a single port (e.g. port1.0.1)
• a continuous range of ports separated by a hyphen (e.g.
port1.0.1-port1.0.4)
• a comma-separated list of ports and port ranges (e.g.
port1.0.1,port1.0.4)
awplus#show system pluggable 
System Pluggable Information

Port Vendor Device Serial Number Datecode Type
--------------------------------------------------------------------------------
port1.0.1 ATI AT-SPSX A03240R151300867 15032801 1000BASE-SX
port1.0.4 ATI AT-SPSX A03240R111800076 15032801 1000BASE-SX
--------------------------------------------------------------------------------
Table 9: Parameters in the output from the show system pluggable command
Parameter Description
Port Specifies the port number for the installed pluggable
transceiver.
Vendor Specifies the vendor’s name for the installed pluggable
transceiver.
Device Specifies the device name for the installed pluggable
transceiver.

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English