C613-50631-01 Rev A Command Reference for IE340 Series 2310
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AUTHENTICATION COMMANDS
AUTH
-WEB-SERVER REDIRECT-DELAY-TIME
auth-web-server redirect-delay-time
Overview Use this command to set the delay time in seconds before redirecting the
supplicant to a specified URL when the supplicant is authorized.
Use the variant no to reset the delay time set previously.
Syntax
auth-web-server redirect-delay-time <5-60>
no auth-web-server redirect-delay-time
Default The default redirect delay time is 5 seconds.
Mode Global Configuration
Examples To set the delay time to 60 seconds for the Web-Authentication server, use the
following commands:
awplus# configure terminal
awplus(config)# auth-web-server redirect-delay-time 60
To reset the delay time, use the following commands:
awplus# configure terminal
awplus(config)# no auth-web-server redirect-delay-time
Related
commands
auth-web-server blocking-mode
auth-web-server redirect-url
show auth-web-server
show running-config
Parameter Description
redirect-delay-time Set the delay time before jumping to a specified
URL after the supplicant is authorized.
<5-60> The time in seconds.
To Next Page
Loading...
Need help?
General
