C613-50631-01 Rev A Command Reference for IE340 Series 2081
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
IPV6 HARDWARE ACCESS CONTROL LIST (ACL) COMMANDS
SHOW
ACL-GROUP IPV6 ADDRESS
show acl-group ipv6 address
Overview Use this command to show the hosts and subnets in a named IPv6 ACL group.
Syntax
show acl-group ipv6 address <group>
Mode Privileged Exec
Example To show all hosts and subnets in an IPv6 ACL group IPV6_GROUP1, use the
command:
awplus# show acl-group ipv6 address IPV6_GROUP1
Output Figure 40-3: Example output from show acl-group ipv6 address
IPV6_GROUP1
Related
commands
acl-group ipv6 address
ipv6 (ipv6-host-group)
Command
changes
Version 5.5.0-1.1: command added
Parameter Description
<group> The name of the IPv6 ACL group.
awplus#show acl-group ipv6 address IPV6_GROUP1ď€
Host Group: IPV6_GROUP1ď€
ď€
2001:DB8::/32ď€
2001:DB9::1/128
To Next Page
Loading...
Need help?
General
