C613-50631-01 Rev A Command Reference for IE340 Series 2534
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PUBLIC KEY INFRASTRUCTURE AND CRYPTO COMMANDS
SHOW
SECURE-MODE
show secure-mode
Overview Use this command to see whether secure mode is enabled or not. Secure mode
disables a number of insecure features, such as Telnet.
Syntax
show secure-mode
Mode User Exec/Privileged Exec
Example To see if secure mode is enabled, use the command:
awplus# show secure-mode
Output Figure 49-6: Example output from show secure-mode
Related
commands
crypto secure-mode
awplus#show secure-mode
Secure mode is enabled
To Next Page
Loading...
