C613-50631-01 Rev A Command Reference for IE340 Series 144
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
BOOT
CONFIG-FILE BACKUP
boot config-file backup
Overview Use this command to set a backup configuration file to use if the main
configuration file cannot be accessed.
Use the no variant of this command to remove the backup configuration file.
Syntax
boot config-file backup <filepath-filename>
no boot config-file backup
Mode Global Configuration
Usage notes For an explanation of the configuration fallback order, see the File Management
Feature Overview and Configuration Guide.
Examples To set the configuration file backup.cfg as the backup to the main configuration
file, use the commands:
awplus# configure terminal
awplus(config)# boot config-file backup flash:/backup.cfg
To remove the configuration file backup.cfg as the backup to the main
configuration file, use the commands:
awplus# configure terminal
awplus(config)# no boot config-file backup flash:/backup.cfg
Related
commands
boot config-file
boot system
boot system backup
show boot
Parameter Description
<filepath-filename> Filepath and name of a backup configuration file.
Backup configuration files must be in the flash filesystem.
Valid backup configuration files must have a . cfg
extension.
backup The specified file is a backup configuration file.
To Next Page
Loading...
Need help?
General
