Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 143
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
BOOT
CONFIG-FILE
To stop running the configuration file “branch.cfg” when the device boots up,
when “branch.cfg” is stored on a USB storage device, use the commands:
awplus# configure terminal
awplus(config)# no boot config-file usb:/branch.cfg
Related
commands
boot config-file backup
boot system
boot system backup
show boot

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English