60
C613-50631-01 Rev A Command Reference for IE340 Series 3136
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
NTP Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the Network Time Protocol (NTP). For more information, see the NTP Feature
Overview and_Configuration Guide.
The device can act as an NTP client to receive time from one or more NTP servers,
and as an NTP server.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare_Plus” Feature Overview and Configuration Guide.
Command List •“ntp authentication-key” on page 3137
•“ntp broadcastdelay” on page 3139
•“ntp master” on page 3140
•“ntp peer” on page 3141
•“ntp rate-limit” on page 3143
•“ntp restrict” on page 3144
•“ntp server” on page 3146
•“ntp source” on page 3148
•“show ntp associations” on page 3150
•“show ntp counters” on page 3152
•“show ntp counters associations” on page 3153
•“show ntp status” on page 3154
To Next Page
Loading...
Need help?
General
