Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 1066
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIP COMMANDS
SHOW
IP PROTOCOLS RIP
show ip protocols rip
Overview Use this command to display RIP process parameters and statistics.
For information on filtering and saving command output, see the “Getting_Started
with AlliedWare Plus” Feature Overview and Configuration_Guide.
Syntax
show ip protocols rip
Mode User Exec and Privileged Exec
Example
awplus# show ip protocols rip
Output Figure 26-1: Example output from the show ip protocols rip command
Routing Protocol is "rip" 
Sending updates every 30 seconds with +/-50%, next due in 12 
seconds 
Timeout after 180 seconds, garbage collect after 120 seconds 
Outgoing update filter list for all interface is not set 
Incoming update filter list for all interface is not set 
Default redistribution metric is 1 
Redistributing: connected static 
Default version control: send version 2, receive version 2 
Interface Send Recv Key-chain 
vlan25 2 2 
Routing for Networks: 
10.10.0.0/24 
Routing Information Sources: 
Gateway BadPackets BadRoutes Distance Last Update 
Distance: (default is 120

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English