Allied Telesis IE340 Series - capability opaque

C613-50631-01 Rev A Command Reference for IE340 Series 1119
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
OSPF COMMANDS
CAPABILITY
OPAQUE
capability opaque
Overview This command enables opaque-LSAs. Opaque-LSAs are Type 9, 10 and 11 LSAs that
deliver information used by external applications.
Use the no variant of this command to disable opaque-LSAs.
Syntax
capability opaque
no capability opaque
Default By default, opaque-LSAs are enabled.
Mode Router Configuration
Example
awplus# configure terminal
awplus(config)# router ospf 100
awplus(config-router)# no capability opaque