Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3045
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DYNAMIC HOST CONFIGURATION PROTOCOL (DHCP) COMMANDS
IP
ADDRESS DHCP
ip address dhcp
Overview This command activates the DHCP client on the interface you are configuring. This
allows the interface to use the DHCP client to obtain its IP configuration details
from a DHCP server on its connected network.
The client-id and hostname parameters are identifiers that you may want to set in
order to interoperate with your existing DHCP infrastructure. If neither option is
needed, then the DHCP server uses the MAC address field of the request to identify
the host.
The DHCP client supports the following IP configuration options:
• Option 1— the subnet mask for your device.
• Option 3— a list of default routers.
• Option 6 — a list of DNS servers. This list appends the DNS servers set on your
device with the ip name-server command.
• Option 15—a domain name used to resolve host names. This option replaces
the domain name set with the ip domain-name command. Your device
ignores this domain name if it has a domain list set using the ip domain-list
command.
• Option 51—lease expiration time.
The no variant of this command stops the interface from obtaining IP
configuration details from a DHCP server.
Syntax
ip address dhcp [client-id <interface>] [hostname <hostname>]
no ip address dhcp
Mode Interface Configuration for VLAN interfaces.
Examples To set the interface vlan2 to use DHCP to obtain an IP address, use the commands:
awplus# configure terminal
awplus(config)# interface vlan2
awplus(config-if)# ip address dhcp
Parameter Description
client-id
<interface>
The name of the interface you are activating the DHCP client on. If
you specify this, then the MAC address associated with the
specified interface is sent to the DHCP server in the optional
identifier field.
Default: no default
hostname
<hostname>
The hostname for the DHCP client on this interface. Typically this
name is provided by the ISP.
Default: no default

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English