C613-50631-01 Rev A Command Reference for IE340 Series 1540
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
BGP AND BGP4+ COMMANDS
SHOW
BGP IPV6 DAMPENING (BGP4+ ONLY)
show bgp ipv6 dampening (BGP4+ only)
Overview Use this command to show dampened routes from a BGP4+ instance within an
IPv6 environment. Use the show ip bgp dampening (BGP only) command to show
dampened routes from a BGP instance within an IPv4 environment.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show bgp ipv6 dampening
{dampened-paths|flap-statistics|parameters}
Mode User Exec and Privileged Exec
Usage notes Enable BGP4+ dampening to maintain dampened-path information in memory.
Examples
awplus# show bgp ipv6 dampening dampened-path
awplus# show bgp ipv6 dampening flap-statistics
awplus# show bgp ipv6 dampening parameter
Related
commands
show ip bgp dampening (BGP only)
Command
changes
Added to AlliedWare Plus prior to 5.4.6-1
Version 5.4.7-2.1: BGP support added for x510 and x550 series
Version 5.4.7-2.4: BGP support added for IE300 series
Parameter Description
dampened-paths Display paths suppressed due to dampening.
flap-statistics Display flap statistics of routes.
parameters Display details of configured dampening parameters.
To Next Page
Loading...
Need help?
General
