C613-50631-01 Rev A Command Reference for IE340 Series 3216
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LLDP COMMANDS
CLEAR
LLDP TABLE
clear lldp table
Overview This command clears the table of LLDP information received from neighbors
through specified ports. If no port list is supplied, neighbor information is cleared
for all ports.
Syntax
clear lldp table [interface <port-list>]
Mode Privileged Exec
Examples To clear the table of neighbor information received on ports 1.0.1 and 1.0.6, use the
command:
awplus# clear lldp table interface port1.0.1,port1.0.6
To clear the entire table of neighbor information received through all ports, use the
command:
awplus# clear lldp table
Related
commands
show lldp neighbors
Parameter Description
<port-list> The ports for which the neighbor information table is to be cleared.
To Next Page
Loading...
Need help?
General
