C613-50631-01 Rev A Command Reference for IE340 Series 3408
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PING-POLLING COMMANDS
DEBUG
PING-POLL
debug ping-poll
Overview This command enables ping poll debugging for the specified ping-poll instance.
This generates detailed messages about ping execution.
The no variant of this command disables ping-poll debugging for the specified
ping-poll.
Syntax
debug ping-poll <1-100>
no debug ping-poll {<1-100>|all}
Mode Privileged Exec
Examples To enable debugging for ping-poll instance 88, use the command:
awplus# debug ping-poll 88
To disable all ping poll debugging, use the command:
awplus# no debug ping-poll all
To disable debugging for ping-poll instance 88, use the command:
awplus# no debug ping-poll 88
Related
commands
active (ping-polling)
clear ping-poll
ping-poll
show ping-poll
undebug ping-poll
Parameter Description
<1-100> A unique ping poll ID number.
all Turn off all ping-poll debugging.
To Next Page
Loading...
Need help?
General
