C613-50631-01 Rev A Command Reference for IE340 Series 1934
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PIM-DM COMMANDS
SHOW
IP PIM DENSE-MODE NEIGHBOR
show ip pim dense-mode neighbor
Overview This command displays PIM-DM neighbor information.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Syntax
show ip pim dense-mode neighbor
Mode User Exec and Privileged Exec
Usage notes The total number of PIM-DM neighbors is restricted to 500 PIM-DM neighbors.
When the 500 PIM-DM neighbor limit is reached, as a result of receiving hello
packets from new PIM-DM neighbors, a log entry will be issued to the log file in the
below format:
Example
awplus# show ip pim dense-mode neighbor
Output Figure 37-6: Example output from the show ip pim dense-mode neighbor
command
<date> <time> <facility>.<severity>
<program[<pid>]>: <message>
----------------------------------------------------------------
2008 Dec 10 00:58:39 user.err x908 PIM-DM[1150]: [VIF] Nbr
Create: Cannot create more than 500 neighbours - ignoring
neighbour 100.0.1.247/32 on vlan100
Total number of neighbors: 500
Neighbor-Address Interface Uptime/Expires Ver
192.168.1.152 vlan2 17:15:42/00:01:28 v2
192.168.1.149 vlan2 17:15:34/00:01:34 v2
To Next Page
Loading...
