EasyManuals Logo

Allied Telesis IE340 Series User Manual

Allied Telesis IE340 Series
3474 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1613 background imageLoading...
Page #1613 background image
C613-50631-01 Rev A Command Reference for IE340 Series 1613
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
ROUTE MAP COMMANDS
MATCH
IPV6 ADDRESS
match ipv6 address
Overview Use this command to add an IPv6 address prefix match clause to a route map entry.
You can specify the prefix or prefixes to match by either:
• specifying the name of an access list. To create the access list, enter Global
Configuration mode and use the access-list command.
• specifying the name of a prefix list. To create the prefix list, enter Global
Configuration mode and use the ipv6 prefix-list command.
A route matches the route map entry if the route’s prefix matches the access list or
prefix list.
Use the no variant of this command to remove the IPv6 address match clause from
a route map entry.
Syntax
match ipv6 address <access-list-id>
match ipv6 address prefix-list <prefix-listname>
no match ipv6 address
no match ipv6 address <access-list-id>
no match ipv6 address prefix-list <prefix-listname>
Mode Route-map Configuration
Usage notes Each entry of a route map can have at most one access list-based IPv6 address
match clause and one prefix list-based IPv6 address match clause. If the route map
entry already has one of these match clauses, entering this command replaces that
match clause with the new clause.
Note that access lists, prefix lists and route map entries all specify an action of deny
or permit. The action in the access list or prefix list determines whether the route
map checks update messages and routes for a given prefix. The action in the route
map, and the map’s set clauses, determine what the device does with update
messages or routes that contain that prefix.
If the match ipv6 address command results in a match against the specified IPv6
address, then the outcome is:
Parameter Description
<access-list-id> {<access-list-name>|<1-199>|<1300-2699>}
The IP access list name or number.
<access-list-name> The IP access list name.
<1-199> The IP access list number.
<1300-2699> The IP access list number (expanded range).
prefix-list Use an IP prefix list to specify which prefixes to match.
<prefix-listname> The prefix list name.

Table of Contents

Other manuals for Allied Telesis IE340 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allied Telesis IE340 Series and is the answer not in the manual?

Allied Telesis IE340 Series Specifications

General IconGeneral
BrandAllied Telesis
ModelIE340 Series
CategorySwitch
LanguageEnglish

Related product manuals