C613-50631-01 Rev A Command Reference for IE340 Series 3002
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF SECURE-MODE AUDIT LINK
show atmf secure-mode audit link
Overview Use this command to detect security vulnerabilities by identifying devices that are
connected to a secure mode node that are not in secure mode or are not
authorized.
Syntax
show atmf secure-mode audit link
Mode Privileged Exec
Example To display AMF secure mode link audits for a node, use the command
awplus# show atmf secure-mode audit link
Output Figure 57-36: Example output from show atmf secure-mode audit link
Related
commands
show atmf
show atmf secure-mode
Command
changes
Version 5.4.7-0.3: command added
ATMF Secure Mode Audit Link:ď€
ď€
* ATMF links connected to devices which are not authorizedď€
or are not in secure-mode.ď€
ď€
Port Link Type Discovered Node/Area Nameď€
---------------------------------------------------------ď€
vlink1 Downlink 16/02/2017 09:28:22 Member3
Table 57-4: Parameters in the output from show atmf secure-mode audit link
Parameter Description
Port Port name on local device.
Link Type Link type.
Discovered Date discovered
Node/Area Name Node or area name of remote device.
To Next Page
Loading...
Need help?
General
