Allied Telesis IE340 Series - TACACS+ Commands; Introduction

50
C613-50631-01 Rev A Command Reference for IE340 Series 2537
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
TACACS+
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use TACACS+ servers. For more information about TACACS+, see the
TACACS+ Feature Overview and Configuration Guide.
TACACS+ is not available in Secure Mode (see the crypto secure-mode command).
Command List •“aaa authorization commands” on page 2538
•“aaa authorization config-commands” on page 2540
•“authorization commands” on page 2541
•“ip tacacs source-interface” on page 2543
•“show tacacs+” on page 2544
•“tacacs-server host” on page 2546
•“tacacs-server key” on page 2548
•“tacacs-server timeout” on page 2549