C613-50631-01 Rev A Command Reference for IE340 Series 697
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SPANNING TREE COMMANDS
CLEAR
SPANNING-TREE STATISTICS
clear spanning-tree statistics
Overview Use this command to clear all the STP BPDU (Bridge Protocol Data Unit) statistics.
Syntax
clear spanning-tree statistics
clear spanning-tree statistics [instance <mstp-instance>]
clear spanning-tree statistics [interface <port> [instance
<mstp-instance>]]
Mode User Exec and Privileged Exec
Usage notes Use this command with the instance parameter in MSTP mode. Specifying this
command with the interface parameter only not the instance parameter will work
in STP and RSTP mode.
Examples
awplus# clear spanning-tree statistics
awplus# clear spanning-tree statistics instance 1
awplus# clear spanning-tree statistics interface port1.0.2
awplus# clear spanning-tree statistics interface port1.0.2
instance 1
Parameter Description
<port> The port to clear STP BPDU statistics for. The port may be a switch
port (e.g. port1.0.4), a static channel group (e.g. sa2), or a
dynamic (LACP) channel group (e.g. po2).
<mstp-
instance>
The MSTP instance (MSTI - Multiple Spanning Tree Instance) to clear
MSTP BPDU statistics.
To Next Page
Loading...
Need help?
General
