C613-50631-01 Rev A Command Reference for IE340 Series 3180
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SNMP COMMANDS
SHOW
SNMP-SERVER
show snmp-server
Overview This command displays the status and current configuration of the SNMP server.
Syntax
show snmp-server
Mode Privileged Exec
Example To display the status of the SNMP server, use the command:
awplus# show snmp-server
Output Figure 62-5: Example output from the show snmp-server command
Related
commands
debug snmp
show counter snmp-server
snmp-server
snmp-server engineID local
snmp-server engineID local reset
SNMP Server .......................... Enabledď€
IP Protocol .......................... IPv4ď€
SNMPv3 Engine ID (configured name) ... Not setď€
SNMPv3 Engine ID (actual) ............ 0x80001f888021338e4747b8e607
To Next Page
Loading...
Need help?
General
