Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 2151
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
QOS COMMANDS
SHOW
MLS QOS INTERFACE
show mls qos interface
Overview Displays the current settings for the interface. This includes its default CoS and
queue, scheduling used for each queue, and any policies/maps that are attached.
Syntax
show mls qos interface [<port>]
Mode User Exec and Privileged Exec
Example To display current CoS and queue settings for interface port1.0.1, use the
command:
awplus# show mls qos interface port1.0.1
Output Figure 42-4: Example output from the show mls qos interface command for
port1.0.1
Parameter Description
<port> Switch port.
awplus#show mls qos interface port1.0.1

Interface: port1.0.1

Number of egress queues: 8

Egress Queue: 0
Status: Enabled
Scheduler: Strict Priority
Queue Limit: 12%
Egress Rate Limit: 0 Kb

Egress Queue: 1
Status: Enabled
Scheduler: Strict Priority
Queue Limit: 12%
Egress Rate Limit: 0 Kb

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English