Allied Telesis IE340 Series - show atmf secure-mode

C613-50631-01 Rev A Command Reference for IE340 Series 2999
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
AMF AND AMF PLUS COMMANDS
SHOW
ATMF SECURE-MODE
show atmf secure-mode
Overview Use this command to display an overview of the secure mode status of an AMF
network.
Syntax
show atmf secure-mode
Mode Privileged Exec
Example To display an overview of AMF secure mode on an AMF master or member node,
use the command:
awplus# show atmf secure-mode
Output Figure 57-33: Example output from show atmf secure-mode on an AMF master
Figure 57-34: Example output from show atmf secure-mode on an AMF node
ATMF Secure Mode:

Secure Mode Status : Enabled
Certificate Expiry : 180 Days
Certificates Total : 8
Certificates Revoked : 0
Certificates Rejected : 0
Certificates Active : 8

Provisional Authorization : 0
Pending Requests : 0

Trusted Master : master_1
Trusted Master : master_2

Key Fingerprint:
48:37:d9:a0:37:32:22:9b:5c:22:da:a2:62:49:a7:e5:a9:bc:12:88
ATMF Secure Mode:

Secure Mode Status : Enabled
Trusted Master : master_1
Trusted Master : master_2

Key Fingerprint:
93:f0:52:a9:74:8f:ae:ea:5b:e2:ee:62:cb:6b:21:22:5a:08:db:98