C613-50631-01 Rev A Command Reference for IE340 Series 2558
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
DHCP SNOOPING COMMANDS
CLEAR
IP DHCP SNOOPING STATISTICS
clear ip dhcp snooping statistics
Overview Use this command to clear DHCP snooping statistics for the specified ports, or for
all ports.
Syntax
clear ip dhcp snooping statistics [interface <port-list>]
Mode Privileged Exec
Example To clear statistics for the DHCP snooping on interface port1.0.1, use the command:
awplus# clear ip dhcp snooping statistics interface port1.0.1
Related
commands
clear arp security statistics
show ip dhcp snooping
show ip dhcp snooping statistics
Parameter Description
<port-list> The ports to clear statistics for. If no ports are specified, statistics are
cleared for all ports. The port list can contain switch ports, or static or
dynamic link aggregators.
To Next Page
Loading...
Need help?
General
