C613-50631-01 Rev A Command Reference for IE340 Series 563
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
SWITCHING COMMANDS
CLEAR
LOOP-PROTECTION ACTION
clear loop-protection action
Overview Use this command to clear the loop protection actions on the specified interfaces.
Syntax
clear loop-protection [interface <port-list>] action
Mode Privileged Exec
Example To clear the loop protection actions on interface port1.0.2, use the command:
awplus# clear loop-protection interface port1.0.2 action
To clear the loop protection actions of all interfaces on a device, use the command:
awplus# clear loop-protection action
Related
commands
loop-protection loop-detect
loop-protection action
show loop-protection
Parameters Description
interface The interface whose actions are to be cleared.
<port-list> A port, a port range, or an aggregated link.
To Next Page
Loading...
Need help?
General
