C613-50631-01 Rev A Command Reference for IE340 Series 2470
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
LOCAL RADIUS SERVER COMMANDS
COPY
LOCAL-RADIUS-USER-DB (FROM FILE)
copy local-radius-user-db (from file)
Overview Use this command to copy the Local RADIUS server user data from a file. The file,
including the RADIUS user data in the file, must be in the CSV (Comma Separated
Values) format.
You can select add or replace as the copy method. The add parameter option
copies the contents of specified file to the local RADIUS server user database. If the
same user exists then the old user is removed before adding a new user. The
replace parameter option deletes all contents of the local RADIUS server user
database before copying the contents of specified file.
Syntax
copy <source-url> local-radius-user-db [add|replace]
Default When no copy method is specified with this command the replace option is
applied.
Mode Privileged Exec
Examples To replace the current local RADIUS server user data to the contents of
http://datahost/ user.csv, use the following command:
awplus# copy http://datahost/user.csv local-radius-user-db
To add the contents of http://datahost/user.csv to the current local RADIUS server
user database, use the following command:
awplus# copy http://datahost/user.csv local-radius-user-db add
Related
commands
copy fdb-radius-users (to file)
copy local-radius-user-db (to file)
Parameter Description
<source-url> URL of the source file.
add Add file contents to local RADIUS server user database.
replace Replace current local RADIUS server user database with
file contents.
To Next Page
Loading...
Need help?
General
