53
C613-50631-01 Rev A Command Reference for IE340 Series 2629
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VRRP Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the Virtual Router Redundancy Protocol (VRRP). For more information, see the
VRRP Feature Overview and Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“advertisement-interval” on page 2631
•“alternate-checksum-mode” on page 2633
•“circuit-failover” on page 2634
•“debug vrrp” on page 2636
•“debug vrrp events” on page 2637
•“debug vrrp packet” on page 2638
•“disable (VRRP)” on page 2639
•“enable (VRRP)” on page 2640
•“preempt-mode” on page 2641
•“priority” on page 2643
•“router ipv6 vrrp (interface)” on page 2645
•“router vrrp (interface)” on page 2647
•“show debugging vrrp” on page 2649
•“show running-config router ipv6 vrrp” on page 2650
•“show running-config router vrrp” on page 2651
•“show vrrp” on page 2652
•“show vrrp counters” on page 2654
•“show vrrp ipv6” on page 2657
To Next Page
Loading...
Need help?
General
