Allied Telesis IE340 Series - debug vrrp events

C613-50631-01 Rev A Command Reference for IE340 Series 2637
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VRRP COMMANDS
DEBUG
VRRP EVENTS
debug vrrp events
Overview Use this command to specify debugging options for VRRP event troubleshooting.
Use the no variant of this command to disable this function.
Syntax
debug vrrp events
no debug vrrp events
Mode Privileged Exec and Global Configuration
Usage notes The debug vrrp events command enables the display of debug information
related to VRRP internal events.
See the VRRP Feature Overview and Configuration Guide for more information
about VRRPv3 debugging details.
Examples The example below shows you how to enable events debugging for VRRP:
awplus# configure terminal
awplus(config)# debug vrrp events
The example below shows you how to disable events debugging for VRRP:
awplus# configure terminal
awplus(config)# no debug vrrp events
Related
commands
show debugging vrrp
undebug vrrp events