Allied Telesis IE340 Series User Manual

C613-50631-01 Rev A Command Reference for IE340 Series 3161
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
PRECISION TIME PROTOCOL (PTP) AND TRANSPARENT CLOCK COMMANDS
SHOW
PTP PORT
show ptp port
Overview Use this command to display the configuration and status information of the
individual ports that have been associated with the clock.
Syntax
show ptp port
Mode Privileged Exec
Example To display configuration and status information of the individual ports associated
with the clock, use the command:
awplus# show ptp port
Output Figure 61-2: Example output from show ptp port
Related
commands
ptp-clk
Command
changes
Version 5.4.7-0.1: command added
Version 5.4.8-0.2: added to x230, x550 series products
IE300-1#show ptp port
==================================================================
% Transparent clock
Global Enable : Enabled
Clock Identity :
00:0c:25:ff:fe:03:92:47
Port Number : 1 (Interface
port1.0.1)
Peer Delay Request Interval (log base 2) : 1
Peer Mean Path Delay : 0
Faulty Flag : False
==================================================================
% Transparent clock
Global Enable : Enabled
Clock Identity :
00:0c:25:ff:fe:03:92:47
Port Number : 2 (Interface
port1.0.2)
Peer Delay Request Interval (log base 2) : 1
Peer Mean Path Delay : 0
Faulty Flag : False

Allied Telesis IE340 Series Specifications

General

Brand	Allied Telesis
Model	IE340 Series
Category	Switch
Language	English