C613-50631-01 Rev A Command Reference for IE340 Series 655
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
VLAN COMMANDS
SHOW
VLAN CLASSIFIER RULE
show vlan classifier rule
Overview Use this command to display information about all configured VLAN classifier rules
or a specific rule.
Syntax
show vlan classifier rule [<1-256>]
Mode User Exec and Privileged Exec
Usage If a rule ID is not specified, all configured VLAN classifier rules are shown. If a rule ID
is specified, a specific configured VLAN classifier rule is shown.
Example To display information about VLAN classifier rule 1, enter the command:
awplus# show vlan classifier rule 1
Output Figure 16-10: Example output from the show vlan classifier rule1 command
Related
commands
vlan classifier activate
vlan classifier rule ipv4
vlan classifier rule proto
Parameter Description
<1-256> VLAN classifier rule identifier
vlan classifier group 1 add rule 1ď€
To Next Page
Loading...
Need help?
General
